LOGIN CUSTOMERS

Support system Vinfoil

Login with your login details

DOWNLOADS
 

Micro SF80MF

“Vinfoil Micro, strong by simplicity”

VINFOIL MICRO SF80 MF system for offset printing machines in the size 700-800 mm

Highlights Micro SF80 MF

  • Foil Saving feature: Multi Reel
  • Perfect foil web tension because of Vinfoil’s magnetic powder clutches, torque control and FT locking shaft
  • Speed of up to 18.000 sheets/hour is achievable
  • Very low building height and the access to the printing units is optimal
  • Changing the reels takes place at ground level, which ensures a very easy and safe operation
  • The sensitive metallic layer of the cold foil is never getting in contact with any part of the Vinfoil Micro SF80 MF

The principle of the Vinfoil Micro SF80 MF

  • Single reel with one large reel or multi reel with up to unlimited small reels (min. width 50 mm) enabling you to cover even small cold transfer spots.
  • No special brackets for multi reel required
  • 3 inch cores no matter if single or multi reel
  • Perfect rewinding result

Description of standard individual Micro section

Foil Unit (FU)

  • In this unit the foil is un-winded and re-winded. One or more cores at the same time
  • FU (Foil Unit) for unwinding and perfect rewinding.
  • Speed up to 18.000 sheets/hour
  • Powder magnetic clutch to ensure web tension, in combination with:
    • 3” FT locking shafts to regulate web tension in between the separate rolls when using multireel
    • 15” touch screen for easy operation
    • Automatic diameter detection for optimal foil use till the end
    • Foil Web Break sensor with a resolution of 20mm
    • Adjustable foil core thickness
    • Remote closing and opening of the chucks
    • Remote diagnosis via Ethernet
    • Perfect winding result

Dimensions
Length: 1935 mm
Width: 950 mm
Height: 1515 mm

Optional

  • Semi-Automatic unloading and loading, to ensure fast change over times
  • Manual movement in horizontal direction
  • Automatic movement in vertical direction.
  • Integrated safety with the foil module
  • Loading and unloading two rolls at the same time
  • Minimum building height

Dimensions
Length: 5180 mm
Width: 2380 mm
Height (measured from module top): 390 mm

  • With this on-line software, foil consumption is calculated by just uploading the pdf with the layer of the cold foil.
  • Very useful for management and prepress.

>> READ MORE

  • If the FSC is not fitting the budget, or space wise it is not possible to install, this device is an alternative
  • An easy tool for preparing fresh reels and empty cores during production.
  • Integrated rulers for optimum reel placement
  • Easy transportable by forklift or pallet truck

Dimensions
Length: 910 mm
Width: 800 mm
Height (measured from floor level): 1120 mm

  • Storage for the unused shafts (up to six)
  • Possibility to store the foil web guide rollers

Dimensions
Length: 1235 mm
Width: 280 mm
Height (measured from module top): 1220 mm

Vinfoil’s Micro, cold foil production, 7 webs