Micro SF110MF

“Vinfoil Micro, strong by simplicity”

VINFOIL MICRO SF110 MF system for offset printing machines size 1000-1100 mm

Highlights Micro SF110 MF

Foil Saving feature: Multi Reel
Perfect foil web tension because of Vinfoil’s magnetic powder clutches, torque control and FT locking shafts
Speed of up to 18.000 sheets/hour is achievable
Very low building height and the access to the printing units is optimal
Changing the reels takes place at ground level, which ensures a very easy and safe operation
The sensitive metallic layer of the cold foil is never getting in contact with any part of the Vinfoil Micro SF110 MF

The principle of the Vinfoil Micro SF110 MF

Single reel with one large reel or multi reel with up to unlimited small reels (min. width 50 mm) enabling you to cover even small cold foil spots.
No special brackets for multi reel required
3 inch cores no matter if single or multi reel
Perfect rewinding result

Description of standard individual Micro section

Foil Unit (FU)

In this unit the foil is un-winded and re-winded. One or more cores at the same time
FU (Foil Unit) for unwinding and perfect rewinding.
Speed up to 18.000 sheets/hour
Powder magnetic clutch to ensure web tension, in combination with:
- 3” FT locking shafts to regulate web tension in between the separate rolls when using multireel
- 15” touch screen for easy operation
- Automatic diameter detection for optimal foil use till the end
- Foil Web Break sensor with a resolution of 20mm
- Adjustable foil core thickness
- Remote closing and opening of the chucks
- Remote diagnosis via Ethernet
- Perfect winding result

Dimensions
Length: 2472 mm
Width:950 mm
Height: 1515 mm

Optional

Semi-Automatic unloading and loading, to ensure fast change over times
Manual movement in horizontal direction
Automatic movement in vertical direction.
Integrated safety with the foil module
Loading and unloading two rolls at the same time
Minimum building height

Dimensions
Length: 5180 mm
Width: 2380 mm
Height (measured from module top): 390 mm

With this on-line software, foil consumption is calculated by just uploading the pdf with the layer of the cold foil.
Very useful for management and prepress.

>> READ MORE

If the FSC is not fitting the budget, or space wise it is not possible to install, this device is an alternative
An easy tool for preparing fresh reels and empty cores during production.
Integrated rulers for optimum reel placement
Easy transportable by forklift or pallet truck

Dimensions
Length: 1310 mm
Width: 800 mm
Height (measured from floor level): 1120 mm

Storage for the unused shafts (up to six)
Possibility to store the foil web guide rollers

Dimensions
Length: 1235 mm
Width: 280 mm
Height (measured from module top): 1220 mm

Vinfoil’s Micro, cold foil production, 7 webs